歡迎進入沈陽行晉科技有限公司網站!
024-88338111
網站首頁
公司簡介
產品展示
產品領域
成功案例
資質榮譽
公司動態
人才招聘
在線留言
聯系我們
聯系我們
  • 地址 : 沈陽市大東區上園路43甲號7門
  • 郵編 :100006
  • 電話 : 024-88338111
  • 傳真 : 024-88334111
  • 熱線電話 : 024-88338111

產品展示

  • JET.L 2018-09-26

    JET.L
    JET.L?is a numerically controlled machining center with 5 interpolated axes, designed for machining operations as:
    Tenoning / Finger Jointing / Drilling
    Mortising / Milling / 4/5 axis profiling
  • JET 2018-09-26

    JET
    JET?is a numerically controlled machining center with 5 interpolated axes, designed for machining operations as:
    Tenoning / Finger Jointing / Drilling
    Mortising / Milling / 4/5 axes profiling.
  • JET.LINER 2018-09-26

    JET.LINER
    JET.LINER?is a machining center with 5 interpolated axes ideal for machining elements for doors and frames and straight elements with a section up to 250x100mm.?
  • CSF2 2018-09-25

    CSF2
    DOUBLE.CSF2, double machining center with 5+5 interpolated axes, numerically controlled, is designed for:
    Tenoning / Finger Jointing
    Boring / Mortising
    Milling
    4/5 axes profiling
    Both at the ends of the elements and?between the ends themselves.
  • JET 2018-09-25

    JET
    DOUBLE.JET?is a double machining center with 6+6 interpolated and numerically controlled axes, equipped with an automatic loading/unloading system.
  • EVOLUTION 2018-09-25

    EVOLUTION
    EVOLUTION?is a double machining center equipped with two independent operating units with 5+5 interpolated axes, to perform machining on the same piece with both heads or two different pieces at the same time.
  • EVO. JET 2018-09-25

    EVO. JET
    EVOLUTION.JET?is a highly flexible machining center both in terms of sizes customization and in terms of the number of working tables that can be fitted with equipment for manual, semi-automatic or fully automatic loading and unloading.
  • EVOJET.LINER 2018-09-25

    EVOJET.LINER
    The?EVOJET.LINER?double head, numerically controlled machining center, equipped with two independent working tables, 4 or more reinforced clamps per table and an automated loading/unloading system, is extremely well-suited to the production of elements for doors in batch 1, also thanks to the?PITAGORA??parametric programming software, the automatic reading of blank size, to sawing unit and to the fast positioning of the motorized clamps.